SOLO ELECTRIC
DUO ELECTRO-PNEUMATIC
THE BRONZE EDITION features a standard digital display for viewing either voltage or current consumption, with manual selection required between the two. LED indicator lights show which circuit is activated and flag crossed or improperly connected wires. The unit includes a wireless remote control without a display, allowing full remote control, though without an automatic test sequence or printable report. This model is TestTRONIK's entry-level unit. *In the pneumatic version, trailer air activation can be controlled manually or remotely.
THE SILVER EDITION includes the Bronze Edition's core functions and adds an integrated color LCD display on the remote control, along with advanced electrical self-diagnostic functions. This integrated color display allows simultaneous viewing of voltage and current, error messages, and color-coded indicators for activated functions. The Silver Edition also features an advanced automatic diagnostic and analysis system for the trailer's electrical circuits, including clear, easy-to-read error messages that improve inspection efficiency and speed. *In the pneumatic version, trailer air activation can be controlled manually or remotely.
SOLO ELECTRIC
INSTALLATION - GETTING STARTED
This unit requires a 12-volt power supply to operate. Depending on the model purchased, a power converter/charger may or may not be built in. If the unit is powered solely by the converter and a power outage occurs, all activated functions will shut off — which could result in serious mechanical damage and/or injury to the mechanic. We strongly recommend always using a battery, even when a converter is included. Follow these simple steps to assemble the unit, if not already done:
- Connect a standard 7-pin electrical cord to the unit's 7-pin receptacle.
- Install and connect a battery, and/or plug the electrical cord directly into a 120-volt power source.
Press the on/off button to power on the unit. Once powered, the display will light up and the unit will be ready for use. The remote is normally pre-synced at the factory, so it should be functional as soon as it's connected.
DUO ELECTRO-PNEUMATIC
INSTALLATION - GETTING STARTED
This unit requires a 12-volt power supply to operate. Depending on the model purchased, a power converter/charger may or may not be built in. If the unit is powered solely by the converter and a power outage occurs, all activated functions will shut off — which could result in serious mechanical damage and/or injury to the mechanic. We strongly recommend always using a battery, even when a converter is included. Follow these simple steps to assemble the unit, if not already done:
- Attach an air line with an air chuck to the unit's EMERGENCY outlet (emergency brake, red).
- Attach an air line with an air chuck to the unit's SERVICE outlet (trailer brake, blue).
- Connect a standard 7-pin electrical cord to the unit's 7-pin receptacle.
- Install a fitting on the unit's air inlet and connect the compressed air supply to it.
- Install and connect a battery, and/or plug the electrical cord directly into a 120-volt power source.
Press the on/off button to power on the unit. Once powered, the display will light up and the unit will be ready for use. The remote is normally pre-synced at the factory, so it should be functional as soon as it's connected.
APPROVED
INSTALLATIONS
While our system features straightforward and rapid installation, we strongly recommend professional installation by a certified technician for optimal safety and performance. With over 200 Authorized RevTronik Distributors across Canada, there’s likely a qualified installer in your area ready to help.
