*COMPATIBLE WITH TipTRONIK TP3 WIRELESS SYSTEM ONLY*
OUR TP3 SERIES is our best seller, because in addition to all the included advantages of the TP2, it has our innovative Wifi-TRONIK wireless communication technology which greatly facilitates and speeds up its installation. NO WIRE BETWEEN TRUCK AND TRAILER. In addition, the WIFI function allows you to communicate remotely with your module. Even without the use of trailers, this precious communication makes it possible to program the module remotely with a computer, to make updates, to activate or deactivate current or future options. Thus, the TP3 is scalable and will follow you for a long time.
The main advantage of the wireless system is that any truck with a TP3 in the cab can synchronize to a trailer in less than 15 seconds. Guest trucks can even use a TP3-Portable and truck-to-truck module to be up and running and protected in seconds.
This TP3-WMK kit includes the electronic epoxy filled box for long life and easy installation with standard Deutsch connector, the contactless sensor, TP-B05, TP-BSR brackets and power wire connection. We do highly recommend using our mounting bracket or protective box depending on the type of trailer you will install the kit
TP-B05 is a plastic protection cover that incorporates inside fixation for the WM module. This box lets you install the WM on any flat surface and gives a gap between the WM and the flat surface that could lower the power of the antenna if fixed directly into it. This bracket lets you install the electronic box and the sensor in an easy way and also protects components from the external environment.
TP-BSR is our standard mounting bracket for the sensor. As usual, we always recommend installing the sensor in front of the trailer in a horizontal position.
*Note that you can choose or add all the components of this set individually on this page to complete your needs.
SEPARATED ITEMS FROM THIS KIT:
The installation of our TipTRONIK is really one of the simplest and fastest in its category. For a quick installation, everything is included in the box. Just need to hook a constant 12 volt power source as the ABS to the WiFi module and install the contactless sensor at the right place.
With the TP3-WM series, some customers are using TP-B05 + TP-BSR or TP-B157 combined with a 25ft wired extension to allow the sensor to be installed at the rear of the trailer. This new positioning helps the operating efficiency of the sensor to compensate for the flexibility of the front of the trailer and the frame which can cause false alarms. You can find these parts in the list below.
Even if the system is simple and quick to install, as a measure of prevention and total safety, we recommend installation by an accredited professional.
One of our 200 Authorized RevTronik Canada-wide Distributors is always much closer to you than you think.
Find your authorized distributor in one click here
|Dimensions||6 × 8 × 1.5 in|