TipTRONIK TP3-WM2

INCLUDING:
TipTRONIK Anti Rollover system with Multi leveling sensor communication RevTronik
TipTronik TP3 WM2 Trailer Dumper Tipper Raised tip Alarm Warning System WIFI GPS Revtronik 1
Add to your Quote Request List

SKU: TP3-WM2

+ QUOTE

TIPTRONIK: TP3-WM2

The difference between WM and WM2 is an integrated leveling electronic chip that can be used to activate some alarm if the leveling of the front frame is too inclined and can prevent overturning on the side of the trailers. WM2 also has input and output that can be programmed for special functions. For some customers, we did use an air pressure sensor on the air suspension to see if a driver drove the trailer with a lowered suspension and started an alarm inside the truck or to automatically control the activation of the air suspension valve and other.

Our TP3 series is our best seller, because in addition to including all the advantages of the TP2, it has our innovative Wifi-TRONIK wireless communication technology which greatly facilitates and speeds up its installation. NO WIRE BETWEEN TRUCK AND TRAILER. In addition, the WIFI function allows you to communicate remotely with your module. Even without the use of trailers, this precious communication makes it possible to program the module remotely with a computer, to make updates, to activate or deactivate current or future options. Thus, the TP3 is scalable and will follow you for a long time.

The main advantage of the wireless system is that any truck with a TP3 in the cab can synchronize to a trailer in less than 15 seconds. Guest trucks can even use a TP3-Portable and truck-to-truck module to be up and running and protected in seconds.

The TP3-WM2 includes the electronic epoxy filled box with standard Deutsch connector for long life and easy installation. The contactless sensor and power wire connection are also included. We do highly recommend to use our mounting bracket or protective box depending on the type of trailer you will install the kit. It could also be possible to put a wired kit to have a hybrid system working with or without wire.

The TP-B124 mounting bracket is our basic and most popular installation kit. This bracket allows you to easily install the box and also protect the components from the external environment as well as an integrated installation of the sensor.

INSTALLATION #1

The installation of our TipTronik is truly one of the easiest and fastest in its class. For a quick installation, everything is included in the box. Simply plug in a constant 12 volt power source like ABS to the WiFi module and install the non-contact sensor in the right place.

INSTALLATION #2

With the TP3-WM series, some customers are now using TP-B05 + TP-BSR or TP-B157 combined with a 25ft wired extension to allow the sensor to be installed at the rear of the trailer. This new positioning helps the operating efficiency of the sensor to compensate for the flexibility of the front of the trailer and the frame which can cause false alarms. You can find these parts in the list below.

APPROVED INSTALLATION

Even if the system is simple and quick to install, as a measure of prevention and total safety, we recommend installation by an accredited professional.

One of our 200 Authorized RevTronik Canada-wide Distributors is always much closer to you than you think.

Find your authorized distributor in one click here

Map Pin Revtronik

Weight 2 lbs
Dimensions 6 × 8 × 1.5 in
Scroll to Top