The TP3-WM includes the epoxy filled electronics enclosure with standard Deutsch connectors for long life and easy installation. You will also receive the contactless sensor and power lead connection. We strongly recommend that you use our mounting bracket and protective box depending on the type of trailer you will be installing your TipTronik.
*Note that you can choose or add all the components of this set individually on this page to complete your needs.
The installation of our TipTronik is truly one of the easiest and fastest in its class. For a quick installation, everything is included in the box. Simply plug in a constant 12 volt power source like ABS to the WiFi module and install the non-contact sensor in the right place.
With the TP3-WM series, some customers are now using TP-B05 + TP-BSR or TP-B157 combined with a 25ft wired extension to allow the sensor to be installed at the rear of the trailer. This new positioning helps the operating efficiency of the sensor to compensate for the flexibility of the front of the trailer and the frame which can cause false alarms. You can find these parts in the list below.
Even if the system is simple and quick to install, as a measure of prevention and total safety, we recommend installation by an accredited professional.
One of our 200 Authorized RevTronik Canada-wide Distributors is always much closer to you than you think.
Find your authorized distributor in one click here
|Dimensions||6 × 8 × 1.5 in|